Multiple electrolytes ‘E’ And Dextrose Injection
| Product/Composition:- | Multiple electrolytes ‘E’ And Dextrose Injection |
|---|---|
| Strength:- | 250ml / 500ml / 1000ml |
| Form:- | Injection |
| Production Capacity | 1 Million Injection/Month |
Description
Transfer an accurately measured volume of Injection, equivalent to about 63 mg (3.5 mEq) of ammonium, to a 500-mL Kjeldahl flask, dilute with water to 200 mL, mix, and add 50 mL of sodium hydroxide solution (2 in 5). Immediately connect the flask by means of a distillation trap to a well-cooled condenser, the delivery tube of which dips into 40 mL of boric acid solution (1 in 25) contained in a suitable receiver. Heat to boiling, and distill about 200 mL. Cool the liquid in the receiver, if necessary, then add methyl red TS, and titrate with 0.1 N sulfuric acid VS. Perform a blank determination, and make any necessary correction. Each mL of 0.1 N sulfuric acid is equivalent to 1.804 mg (0.1 mEq) of ammonium (NH4).Ammonium molybdate solution, Hydroquinone solution, Sodium sulfite solution, Standard preparation, and Blank Prepare as directed in the Assay for phosphate under Multiple Electrolytes Injection Type 1.
Assay preparation Transfer an accurately measured volume of Injection, equivalent to about 4 mg (0.126 mEq) of phosphate, to a 50-mL volumetric flask, dilute with water to volume, and x.ProcedureProceed as directed for Procedure in the Assay for phosphate under Multiple Electrolytes Injection Type 1. Calculate the quantity, in mg, of phosphate (PO4) in each mL of the Injection taken by the formula: